Conforms To:
IEC60320
Gauge (IEC60320) (Model:SFT S1-2501)
Application:
Safequipment offers a wide range ofgauge to meet the most common standards including those from IEC, EN, UL,GB,DIN,VDE and others. Such standards require the checking of size &definition etc. these gauges are constructed from senior stainless steel andappropriate steel with a hardness and a roughness according to standard require.Each gauge is supplied with a certificate of calibration.
Conforms To:
IEC60320
Specification:
Product Model | Standard | Product Name |
SFT S1-2501 | IEC60320-1-Figure 2 | "Go" gauge for connectors to standard sheet C1 |
SFT S1-2502 | IEC60320-1- Figure4 | "Go" gauge for connectors to standard sheet C5 |
SFT S1-2503 | IEC60320-1- Figure5 | "Go" gauge for connectors to standard sheet C7 |
SFT S1-2504 | IEC60320-1- Figure5A | "Go" gauge for side-entry connectors to standard sheet C7 |
SFT S1-2505 | IEC60320-1- Figure6 | "Not Go" gauge for connectors to standard sheet C1 |
SFT S1-2506 | IEC60320-1- Figure7 | "Not Go" gauge for connectors to standard sheet C1,C5 and C7 |
SFT S1-2507 | IEC60320-1- Figure8 | "Not Go" gauge for connectors to standard sheet C1 and C7 |
SFT S1-2508 | IEC60320-1- Figure9 | "Not Go" gauge for appliance inlets to standard sheet C8,C8A and C8B |
SFT S1-2509 | IEC60320-1- Figure9A | "Go" gauge for connectors to standard sheet C9 |
SFT S1-2510 | IEC60320-1- Figure9B | "Not Go" gauge for connectors to standard sheet C9 |
SFT S1-2511 | IEC60320-1- Figure9C | "Go" gauge for appliance inlets to standard sheet C10 |
SFT S1-2512 | IEC60320-1- Figure9F | "Go" gauge for connectors to standard sheet C13 |
SFT S1-2513 | IEC60320-1- Figure9G | "Not Go" gauge for connectors to standard sheet C13 and C17 |
SFT S1-2514 | IEC60320-1- Figure 9H | "Go" gauge for appliance inlets to standard sheets C14, C16 AND C18 |
SFT S1-2515 | IEC60320-1- Figure 9J | "Go" gauge for connectors to standard sheet C15 |
SFT S1-2516 | IEC60320-1- Figure 9K | "Go" gauge for connectors to standard sheet C17 |
SFT S1-2517 | IEC60320-1- Figure 9L | "Go" gauge for connectors to standard sheet C19 |
SFT S1-2518 | IEC60320-1- Figure 9M | "Go" gauge for appliance inlets to standard sheet C20 and C24 |
SFT S1-2519 | IEC60320-1- Figure 9N | "Go" gauge for connectors to standard sheet C21 |
SFT S1-2520 | IEC60320-1- Figure 9P | "Go" gauge for appliance inlets to standard sheet C22 |
SFT S1-2521 | IEC60320-1- Figure 9Q | "Go" gauge for appliance inlets to standard sheet C23 |
SFT S1-2522 | IEC60320-1- Figure 9R | "Not Go" gauge for connectors to standard sheet C13,C15 and C17 |
SFT S1-2523 | IEC60320-1- Figure 9S | "Go" gauge for connectors to standard sheet C15A |
SFT S1-2524 | IEC60320-1- Figure 9T | "Go" gauge for appliance inlets to standard sheet C16A |
SFT S1-2525 | IEC60320-1- Figure 22 | Blades for checking the resisitance against deformation of the front part of the connector to standard sheet C7 |
SFT S1-2526 | IEC60320-1- Figure 27 | Gauges for checking the distance form the engagement face of connectors to the point of first contact |
SFT S1-2527 | IEC60320-2-2 Figure 101 | "Go" gauge for appliance outlets to standard sheet F (see 8.1) |
SFT S1-2528 | IEC60320-2-2 Figure 103 | "Go" gauge for appliance outlets to standard sheet J (see 8.1) |