Conforms To:
UL498
Gauge (UL498) (Model:SFT S1-2301)
Application:
Safequipment offers a wide range ofgauge to meet the most common standards including those from IEC, EN, UL,GB,DIN,VDE and others. Such standards require the checking of size &definition etc. these gauges are constructed from senior stainless steel andappropriate steel with a hardness and a roughness according to standard require.Each gauge is supplied with a certificate of calibration.
Conforms To:
UL498
Specification:
Product Model | Standard | Product Name | Remark |
SFT S1-2301 | UL498 Figure 9.1 | articulate probe with web stop |
|
SFT S1-2302 | UL498 Figure 10.1 | probe |
|
SFT S1-2303 | UL498 Figure 31.1 | flat probe |
|
SFT S1-2304 | UL498 Figure 69.1 | reference plug |
|
SFT S1-2305 | UL498 Figure 94.1 | impoper insertion test blades | Set of two |
SFT S1-2306 | UL498 Figure 105.1 | test plug | Set of two |
SFT S1-2307 | UL498 Figure 105.2 | test blade |
|
SFT S1-2308 | UL498 Figure 118.1 | receptacle test fixture |
|
SFT S1-2309 | UL498 Figure 118.3 | push out tool |
|
SFT S1-2310 | UL498 Figure 118.5 | bridge |
|
SFT S1-2311 | UL498 Figure 119.1 | test pin A |
|
SFT S1-2312 | UL498 Figure 119.2 | test pin B |
|
SFT S1-2313 | UL498 Figure 119.3 | 57g ground pin |
|
SFT S1-2314 | UL498 Figure 119.4 | 113g ground pin |
|
SFT S1-2315 | UL498 Figure 129.2 | No.14 AWG test pin |
|
SFT S1-2316 | UL498 Figure 132.1 | test probe |
|
SFT S1-2318 | UL498 Figure 144.2 | fixture for assembly security test |
|
SFT S1-2319 | UL498 Figure SD13.2 | over size ground pin | |
SFT S1-2319 | UL498Figure SD5.1/13.1 | Standard grounding pin |
|