Conforms To
IEC 60068-2-75:2014, IEC61439-1:2009, IEC62262-2002
Pendulum Hammer Tester (2J-50J) IEC 60068-2-75(Model:SFT S1-2063)
Application
The hammer consists basically of a strikingelement which falls freely from rest through a pendulum height,selected from following table 1, the axis of the pivot is at 1000mm above the measuring point, and thependulum is composed of a nominally rigid arm and of a striking elementcomplying with the requirements of table 2.
In all cases, when the pendulum is released, it shall be allowed to fallonly under the influence of gravitational force.
Conforms To
IEC 60068-2-75:2014, IEC61439-1:2009, IEC62262-2002
Specifications
A, Impact Height: 200mm-1200mm (manual adjustment)
B, Striking Elements: 2J, 5J, 10J, 20J, 50J (options)
C, Pendulum arm: long1000 mm, different striking elements equip with different pendulum arm accordingto below equivalent mass:
D, Release Methods: manual released
E, Before and after the impact device around move, up and down adjustable,impact angle is adjustable
F, Outer Dimensions: 1000mm* 800mm* 2200 mm
G, Weight: 180KG
Ordering Information
SFT S1-2063 PendulumHammer Tester (2J-50J)
Options
Striking Elements: 2J, 5J, 10J, 20J, 50J (options)
Striking Elements material: Steel (HRE53-56)
2J Striking Elements: Dia. 35mm, long64mm, equivalent mass 0.5kg
5J Striking Elements: Dia. 60mm, long75mm, equivalent mass 1.7kg
10J Striking Elements: Dia. 80mm, long 117mm, equivalent mass 5kg
20J Striking Elements: Dia. 100mm, long 100mm, equivalent mass 5kg
50J Striking Elements: Dia. 125mm, long 125mm, equivalent mass 10kg