Conforms To
IEC 60068-2-75 :2014 Test Ehc
Vertical Hammer Tester IEC 60068-2-75 (Model:SFT S1-2058)
Application
The hammer consists basically of a strikingelement which falls freely from rest through a vertical height, selected fromfollowing table, on to the specimen surface held in a horizontalplane. The fall of the striking element shall be along a guideway, for examplea tube, with negligible braking. This guideway shall not rest on the specimenand the striking element shall be free of the guideway on striking thespecimen.
Conforms To
IEC 60068-2-75 :2014 Test Ehc
Specifications
A, Drop Height: 0-1000 – mm (manual adjustment)
B, Striking Elements: 1J, 2J, 5J, 10J, 20J, 50J (options)
C, Pipe: height 300 mm, 200 mm, 400 mm and 500 mm
Size according to differentstriking elements
D, Release Methods: electromagnet released, ensure the vertical drop andinstantaneous release
F, Steel fence to ensure safety
G, Drop support floor size: 600 mm * 600 mm,
Hardness HRR85-100,nylon thickness 8 mm, base plate for steel plate
H, Power: 220V 50Hz or 110V 60Hz
I, Outer Dimensions: 1070mm* 600mm* 600 mm
J. Weight: 30KG
Ordering Information
SFT S1-2058 VerticalHammer Tester—220V 50Hz or 110V 60Hz
Options
Striking Elements: 1J, 2J, 5J, 10J, 20J, 50J (options)
Striking Elements material: Steel (HRE53-56)
1J Striking Elements: Dia. 18.5mm,long 115mm, equivalent mass 0.25kg
2J Striking Elements: Dia. 35mm, long64mm, equivalent mass 0.5kg
5J Striking Elements: Dia. 60mm, long75mm, equivalent mass 1.7kg
10J Striking Elements: Dia. 80mm, long 117mm, equivalent mass 5kg
20J Striking Elements: Dia. 100mm, long 100mm, equivalent mass 5kg
50J Striking Elements: Dia. 125mm, long 125mm, equivalent mass 10kg