Conforms To
IEC62368-1:2020clause 4.8.4.6 330N, 100mm*250mm flat surface
IEC62368-1:2020clause 8.10.3 220N/440N, 30mm diameter circularcylinder
(options IEC62368-1:2020clause 8.6.2.3 800N, 125mm*200mm flatsurface)
330N/440N Crush Force Tester (Model:SFT S2-1611A)
Application
Crush Force Tester is a pressure andtensile test conducted on the tested product.
For the handheld remote-controldevices, a 100mm by 250mm flat surface is used to apply a crushing force of330N ± 5N to the tested period of 10s.
The cart, stand or carrier deviceshould be such that when subjected to a force of 220N applied for 1 min to any greppableor leverage point accessible to child, there will be no permanent deformationor damage that can cause personal injury. The force should be applied throughthe end of a 30mm diameter circular cylinder of 100N or 440N.
(options IEC62368-1:2020 clause 8.6.2.3 800N, 125mm*200mm flat surface)
Conforms To
IEC62368-1:2020clause 4.8.4.6 330N, 100mm*250mm flat surface
IEC62368-1:2020clause 8.10.3 220N/440N, 30mm diameter circularcylinder
(options IEC62368-1:2020clause 8.6.2.3 800N, 125mm*200mm flatsurface)
Specifications
A. Holding time: 1~999scan be set;
B. Pressure display:0-500N force value can be manually reset to zero; (Other force are optional)
C. Force sensor: digitaldisplay, resolution 0.1N;
D. Pressure contactarea: 100mm*250mm flat surface, 30mm diameter circular cylinder
E. Rigid support surface:>150mm× 300mm
H. Outer Dimensions: W800mm* D1000mm * H1200mm
I. Weight: 80KG
Ordering Information
SFT S2-1611A 330N/440N Crush Force Tester
Options SFT S2-1611 800N Crush Force Tester