Conforms To
IEC62368-1:2020 clause 8.8.2, IEC60601-1:2020 clause 9.4.4
Equipment Handle Strength Tester (Model:SFT S2-1607)
Application
Equipment Handle Strength Tester is adevice in which the handle and its fixed parts bear a force equal to four timesthe weight of the device and are uniformly applied to a length of 7cm at the centerof the handle (IEC60601-1 clause 9.4.4) and 7.5cm at the center of the handle(IEC62368-1:2010 clause 8.8.2). Do not pull hard, gradually increase from zeroto the test value within 5s to 10s, and maintain it for 1min, Weight: 0-200kg;After the test, there should be no looseness between the handle and theequipment, nor should there be any permanent deformation, cracking, or otherdamage.
The lifting handle or handle onportable medical equipment, as well as its fixing parts, should withstand aforce equal to 3 or 4 times the weight of the equipment to ensure sufficientmechanical strength.
Conforms To
IEC62368-1:2020clause 8.8.2, IEC60601-1:2020 clause 9.4.4
Specifications
A, Acceleration time:5-10.0s
B. Holding time: 1~99.9s,settable
C. Tension value:0~1960N/0~200Kgf can be set
D. Digital display accuracy:0.1N/0.01Kgf
E. Control accuracy: ≤3%
F. Test scope: singleposition and multi position
G. Hook specifications:width 70 mm, thickness 1 mm, 3 mm;
width 75mm, thickness 1mm, 3mm
H. Outer Dimensions: W1550mm* D1200mm * H1980mm
I. Weight: 100KG
Ordering Information
SFT S2-1607Equipment Handle Strength Tester