ConformsTo
IEC60884 Fig30, VDE0620, BS1363
Apparatus to Verify the Fixation of Pins In the Body of the Plug (Model:SFT S2-1311)
Application
The plug isplaced on a rigid steel plate provided with holes suitable for the pins of theplug.
Thedistances between the centers of the holes shall be the same as the distancesbetween the centers of the circle circumscribed around the cross-sectional areaof each pin in the standard sheet of the plug.
Each holeshall have a diameter equal to that of the circle circumscribed around thecross-sectional area of the pin plus (6 ± 0,5) mm.
The plug ispositioned on the steel plate in such a way that the centers of the circlescircumscribing the pins coincide with the centers of the holes.
A pull Pequal to the maximum withdrawal force as given in table 16, is applied, withoutjerks, for 1 min on each pin in turn, in the direction of the longitudinal axisof the pin.
The pull isapplied within a heating cabinet at a temperature of (70 ± 2) °C, 1 h after theplug has been placed in the heating cabinet.
After thetest, the plug is allowed to cool down to ambient temperature and it shall beverified that no pin has been displaced in the body of the plug by more than 1mm.
ConformsTo
IEC60884 Fig30, VDE0620, BS1363
Specifications
A, TestStation: one
B , Weight:50N*1unit
20N*2units
30N*1unit
4N*1unit
C, StandardSocked: BS socked*1unit
USA socked*1unit
Germany socked*1unit
GB 6A socked*1unit
GB 10A socked*1unit
GB 16A socked*1unit
D. Outer Dimensions: 195mm*195mm*300mm
E. Weight: 30KG
OrderingInformation
SFT S2-1311 Apparatus to Verify the Fixation ofPins in the Body of the Plug
