Conforms To
EN60350-2
Standardised Cookware EN60350-2 (Model:SFT S2-1085A)
Conforms To
EN60350-2
Specifications
A, The material of cookware bottomis stainless steel 1,4016, the thickness is 6mm ± 0.05mm, the surface shall notbe shiny.
B. For the side wall 1,4301 stainlesssteel the thickness is 1mm ± 0.05mm, the cookware is cylindrical withouthandles or protrusions
C. Optional Aluminum Lid, thicknessis 2mm ± 0.05mm, the dimensions for the lid are fixed in Table Z3, each hole onthe hole circle of the lid has a diameter of 16mm ± 0.1mm, the holes shall beevenly distributed on the hole circle.
D, Optional fixing device withtemperature sensor in the center of the lid cover, made of plastic
Diameter of the cookware bottom(outside) mm | Diameter of the lid mm | mm | Number of holes on the circle | Total cookware height(outside) | Flatness of cookware bottom mm | Water load | Cooking zone size category mm | Standardised cookware categories |
120±0.5 | 7 | < 0.075 | 650 | ≥ 100 < 130 | A | |||
150±0.5 | 165 ± 1 | 110 ± 1 | 11 | 125 ± 0.5 | ≥ 0 < 0.075 | 1030 | ≥ 130 < 160 | |
180±0.5 | 200 ± 1 | 140 ± 1 | 16 | 125 ± 0.5 | ≥ 0 < 0.075 | 1500 | ≥ 160 < 190 | B |
210±0.5 | 230 ± 1 | 170 ± 1 | 22 | 125 ± 0.5 | ≥ 0 < 0.1 | 2050 | ≥ 190 < 220 | C |
240±0.5 | 265 ± 1 | 200 ± 1 | 29 | 125 ± 0.5 | ≥ 0 < 0.1 | 2700 | ≥ 220 < 250 | |
270±0.5 | 300 ± 1 | 125 ± 0.5 | ≥ 0 < 0.15 | 3420 | ≥ 250 < 280 | D | ||
300±0.5 | 330 ± 1 | 125 ± 0.5 | ≥ 0 < 0.15 | 4240 | ≥ 280 < 310 | |||
330±0.5 | 365 ± 1 | 290/270 a ± 1 | 125 ± 0.5 | ≥ 0 < 0.15 | 5140 | ≥ 310 ≤ 330 |
SFT S2-1085A Standardised Cookware EN60350-2(a set of 8)
Optional Aluminum Lid & fixingdevice with temperature sensor
