Conforms To
IEC60529, IEC60598-1, ISO16750-1-2006, ISO20653, DIN40050-9, VW80106-2008
IPX9 High Pressure and Temperature Water Jet Tester （Model：SFT S2-1045）
Application
IPX9 High Pressure and Temperature Water Jet Tester are intended for testing protected against high pressure and temperature water jets, it is mainly used for the inspection of the product protection grade IPX9 of automobile locomotive parts and parts, motor electronics industry and other products.
IPX9 High Pressure and Temperature Water Jet Tester are water projected at high pressure and high temperature against the enclosure from any direction shall not have harmful effects.
IPX9 High Pressure and Temperature Water Jet Tester is carried out by the water jet injection shell flowing out of the standard fan nozzle. The water temperature should be kept at 80±5 °C during the test;
For small enclosures (largest dimension less than 250mm), place on the turntable speed with 5±1r/min according to the normal working position of the sample, the spray positions is 0°, 30°, 60°, 90°, the test duration is 30s per position.
For large enclosures (largest dimension greater than or equal to 250mm), the enclosure shall be mounted as per intended use. The entire exposed surface area of the enclosure shall be subjected to the spray at some point during the test procedure. Spray positions: the enclosure shall be sprayed from all practical directions covering the entire surface area and the spray shall be, as far as possible, perpendicular to the sprayed surface. Distance between nozzle and sample under test shall be 175 ± 25 mm. The test duration is 1min / m2 of the calculated surface area of the enclosure (excluding any mounting surface), with a minimum duration of 3 min.
Conforms To
IEC60529, IEC60598-1, ISO16750-1-2006, ISO20653, DIN40050-9, VW80106-2008
Features
--- Machine material is steel plate is painted and stainless steel;
--- Self-contained cabinet with large viewing window with LED lighting;
--- With separate water tank, circulating water, automatic control of water ingress, and low water level alarm detection to prevent the pump from being damaged due to dry water shortage;
--- Stainless steel turntable speed and angle are adjustable;
--- Touch Screen Controller;
--- With high-pressure high-temperature water pump and solenoid valve;
--- Leakage safety, short circuit safety, overload (pressure pump overload warning) protection device;
--- With electronic water pressure gauge and electronic flow meter;
--- PT100 temperature sensor, temperature automatic IPD control;
--- Test time can be set;
--- Options external separate nozzle with waterway, add bracket are convenient to fix the nozzle; the software controls the nozzle separately; the nozzle spray time is 3 minutes for large enclosures test sample.
Specifications
A, Power: 380V 50Hz, 10KW (grounding resistance ≦ 4Ω)
B, Number of fan nozzles: 4
C, Nozzle: alloy standard nozzle (non-stainless steel)
D, Spray angle: 0°30°60°90° (angle position adjustable)
(0° can be adjusted up, down, left and right;
30° and 60° can be adjusted back and forth under the same angle;
90° to the center, the top center of the sample, cannot be adjusted, and adjustable turntable height adjustment distance).
E, Water temperature: room temperature to 90° (temperature adjustable, water temperature rises to 80 °C takes 25min) (optional 15±10° to 90°)
F, Spray distance: 100-200mm (manually adjust)
G, Spray pressure: 8-10Mpa (81.5～101.9kg/cm2) (manually adjustable)
H, Test time: 0-999M can be set, 30S per position (120S in 4 positions, automatic adjustment, after one nozzle finishes spraying, the other nozzle starts spraying, spraying in turn, a total of 120 seconds)
I, Electronic water pressure gauge: 0-13Mpa
J, Electronic flowmeter: 0 to 100L/min (flow rate can be adjusted at 15±1L/min)
K, Water jet impact force: 0.9-1.2N (equipped with force calibration device, can be stored externally)
L, Turntable: diameter 400mm, load capacity 15Kg
M, Turntable speed: 1 ~ 10r / min (adjustable, turntable can be forward and reverse, can be lifted)
N, Test sample power supply: 220V
O, Observation window size: 500mm * 500mm (glass, equipped with a wiper)
P, Water tank capacity: 200L
Q, Inner dimensions: L1000mm*D1000mm*H1000mm
Outer dimensions: L1300mm*D1500mm*H1800mm
R, Weight: 150KG
Remarks: Water source preparation (distilled water or purified water) by yourself.
Ordering Information
SFT S2-1045 IPX9 High Pressure and Temperature Water Jet Tester
