
Conforms To
IEC60695-2-10 (2021)IEC 60695-2, under the general heading Fire hazard testing - Part 2:Glowing/hot-wire based test methods, consists of the following parts:
Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and commontest procedure
Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability testmethod for end-products
Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability testmethod for materials
Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignitability testmethod for materials
Glow-wire Tester REV5(MODEL:SFT F3-3020)
Application
The Glow-Wire tester is used toestablish if overheated electrical and electronic components resulting frommalfunctions such as overload, short circuit, poor connection, or others may igniteand spread the flame to the rest of the product. The Glow-Wire Tester simulatesan overloaded resistor or other ignition source and applies heat to thespecimen for a short period of time. Through observation and measurement, thefire hazard of the specimen can be determined.
IEC60695-2-10 (2021)
IEC 60695-2, under the general heading Fire hazard testing - Part 2:Glowing/hot-wire based test methods, consists of the following parts:
Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and commontest procedure
Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability testmethod for end-products
Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability testmethod for materials
Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignitability testmethod for materials
IEC60335-1,IEC60598-1, IEC60745-1, IEC60884-1. GB/T5169.10/11/12/13
Specifications
A, Power Supply: 220V 50Hz or 115V 60Hz
B, Glow-wireTemperature Range: Room temperature~999°C (adjustable)
C, Glow Wire : Cr/Ni(>77%Ni/20±1 % Cr, Ø4mm±0.07mm) 500W
D, Fluctuation ofTemperature: ±3°C
E, TemperatureTesting Component : Type Kthermocouple(¢1.0mm, 0~1050°C)
F, Temperaturecalibration: 960 ±10°C
G, Pressureof test sample: 0.95N±0.1N
H, Depth of Penetration: 7mm±0.5mm
I, Time of Test: 0.1~999.9 seconds adjustment
J, Time of Test: 10mm/s-25mm/s
K, CabinetSpecifications : >0.5m³, black interior
L, Vent Pipe Diameter : 150mm
M, Outer Dimensions : W*D*H=1200mm*700mm*1350mm
N, Weight: 80KG
Ordering Information
SFT F3-3020 Glow-WireTester - specify 220V 50Hz or 115V 60Hz