Application
Combustible liquids used insideelectrical and electronic equipment may ignite due to overheating and leak outof the fireproof protective enclosure, causing electrical fires, endangeringthe reliable operation of the equipment and personal safety.
Conforms To
IEC60950-1:2005 clause 4.6.2, AnnexA.3. IEC62368-1 Annex S.3.2
Hot Flaming Oil Tester IEC 62368(Model:SFT F3-3080)
Application
Combustible liquids used insideelectrical and electronic equipment may ignite due to overheating and leak outof the fireproof protective enclosure, causing electrical fires, endangeringthe reliable operation of the equipment and personal safety.
Instrument
SFT F33080 Hot Flaming Oil Testeris involves heating 10 mL of fuel with a specified performance (38 MJ/L 0.845g/mL to 0.865 g/mL) to burn for 1 min, and then pouring it all smoothly at acertain height (100 mm) and a certain flow rate (1 mL/s) into the center of theopening of the test sample (fire protection enclosure) to evaluate the fireprotection performance of the test sample based on whether to ignite theignition bedding with a specified distance (50 mm) and a specified density (40g/m2) under the test sample.
Features
---Self contained cabinet withlarge viewing window gives a draft-free test
---Dark interior cabinet colorfor better test viewing
---Easy access to testing areaduring setup
---Internal cabinet light can be turned on during test setupand shut off to give better viewing during the test
---Built in exhaust fan andcontrol
---Control panel has allcontrols in easy reach including lighting and exhaust
---Touch Screen Controller
---The door protection switchensures that the test is conducted in the closed state to ensure the safety ofpersonnel during the test
Conforms To
IEC60950-1:2005 clause 4.6.2, AnnexA.3. IEC62368-1 Annex S.3.2
Specifications
A, Power Supply : 220V 50Hz or 110V 60Hz
B, Oil scoopvolume:>10mL
C, Oilpouring flow: 1mL/s
D, Oil scoop: coppersmall scoop (diameter not greater than 65mm), using electrically heated fuel
E, Ignition bedding:40g/m2 standard bleached cloth (consumables)
F. Ignition bedding distance: about 50mm below the test sample
G. Hot oil pouring height: 100mm (adjustable)
H. Hot oil holding time: 60s (1~9999s can be set)
I. Hot oil pouring time: 10s (1~9999s can be set)
J, Test fixture: 304stainless steel material, Can be placed with bleached cloth
K Test fuel oil: average calorific value 38MJ/L, density 0.845g/mL~0.865g/mL,flash point 43.5 ℃~93.5 ℃
(prepare by customer)
L Vent Pipe Diameter : 100mm
M Outer Dimensions : W*D*H=960mm*530mm*1020mm
N Weight : 60KG
Ordering Information
SFT F3-3080 Hot FlamingOil Tester
