Conforms To
EN71-1 clause 8.17.2
Mouth-Actuated Toys Tester (Model:SFT S1-2100)
Application
Preventmouth is moving toys or children inhale mouthpiece and cause a choking hazard ;used to determine : In the case of controlling the maximum pressure can beapplied , the provisions of the volume of air from the mouthpiece back intotoys, whether completely off the contents into a small the cylindrical bodymember .
Othermouth-actuated toys: Connect a piston pump capable of discharging and receivingmore than 300 cm3of air in less than 3 s to the mouthpiece of the toy. Arrangea relief valve so that the pump will not generate a positive or negativepressure of more than 13,8 kPa. Subject the toy to 10 alternating blowing andsucking cycles, each within 5 s and of at least (295 ± 10) cm3 of air includingthe volume which may be discharged through the relief valve. If the air outletis accessible, ensure that the above is also applied to the outlet. Determinewhether any released component fits entirely in the small parts cylinder whentested.
Conforms To
EN71-1 clause 8.17.2
Specifications
A, Subject thetoy to 10 alternating blowing and sucking cycles, each within 5 s and of atleast (295 ± 10) cm3 of air including the volume which may be dischargedthrough the relief valve.
B, Equipped with pressure gauge
C, Equipped with toys for different pipe fittings
D, Gas flow through the valve control
E, Dimensions: 650mm×400mm×260mm
F, Weight: 40KGS
OrderingInformation
SFT S1-2100Mouth-Actuated Toys Tester—220V/50Hz or 110V/60Hz
