Conforms To
Textile:
ASTM D 1424,DIN 53862,EN ISO 13937-1,ISO 4674-2,ISO 9290,GBT 3917.1,M&S P29,NEXT 17,NF G07-149
Plastics:
ASTM D 1922,GB/T 11999,ISO 6383-2,JIS K 7128-2,NF T54 141
Nonwovens:
ASTM D 5734,WSP 100.1
Paper:
APPITA P 400,ASTM D 689,BS 4468,CSA D9,DIN 53128,EN 21974,GB/T 455,ISO 1974,JIS P 8116,PAPTAC D9 SCAN P11,SNV 198482,TAPPI T414 UNI 6444
Digital Elmendorf Tearing Tester (Model:SFT T5-5011)
Application
Digital Elmendorf is a ballistic type tearing tester which is usedto determine the resistance of a material to tearing. Likes textiles, plastics, paper orboard.
Conforms To
Textile:
ASTM D 1424,DIN 53862,EN ISO 13937-1,ISO 4674-2,ISO 9290,GBT 3917.1,M&S P29,NEXT 17,NF G07-149
Plastics:
ASTM D 1922,GB/T 11999,ISO 6383-2,JIS K 7128-2,NF T54 141
Nonwovens:
ASTM D 5734,WSP 100.1
Paper:
APPITA P 400,ASTM D 689,BS 4468,CSA D9,DIN 53128,EN 21974,GB/T 455,ISO 1974,JIS P 8116,PAPTAC D9 SCAN P11,SNV 198482,TAPPI T414 UNI 6444
Instrument
SFT T5-5011Digital Elmendorf Tearing Tester is an Low-power Elmendorf tearing strengthtester, fully standards-based fan Swing Pendulum Using high-precision opticalsensor, Automatic pendulum weight detection,, the maximum range 128N testingcapabilities
Test Principle
Lift thependulum up to a certain height to give it an initial potential energy. Thependulum tears the specimen while swinging down. The electronic test systemcalculates the decreased energy caused by tearing to obtain the required forcefor tearing.
Features
--- Automatic pendulum weightdetection, automatic zeroing and visible and audible indicators
--- Hi-resolution digitalencoder
--- Design of the high range,Select E the pendulum can test to 128N
--- Two clamps clearance 2.5 and 2.8 adjustable, adjustableblade position to meet a variety of Testing standards.
--- LED backlight, digitaladjust lighting brightness.
Specifications
A, StandardPendulum Weights (A-D): 800,1600,3200&6400gms
B, OptionalPendulum Weight (E): 12800gms
C, Measuringaccuracy: 1% of Pendulum range
D, Readability:1mN
E, Calibrationweights: 50% of each Pendulum range
F, Units ofMeasurement: N, cN, mN, kgf, gf, lbf, ozf
G, MaximumSpecimen Thickness: 8mm
H, Clamps clearance:2.5mm , 2.8mm
I, Cut Length:20mm
J, Blade: Titaniumnitride coated
K, Dimensions: 660mm×490mm×350mm(W×D×H)
L, Weight: 20Kg
Ordering Information
SFT T5-5011 Digital ElmendorfTearing Tester – 220V 50Hz or 115V 60Hz
Includes:
Standard Pendulum Weights (A-D) 800,1600,3200&6400gms
Calibration weights (A-D) 800,1600,3200&6400gms