Plug & Stock &Switch Tester IEC60884

Home > Products > E&E Safety Equipments > Plug & Stock &Switch Tester IEC60884

Test Device for Checking Damage to Conductors (Model:SFT S2-1302)

ConformsTo

IEC60884 Figure11 clause 12.2.5, VDE0620, IEC60947.1 Figure 1


Test Device for Checking Damage to Conductors (Model:SFT S2-1302)


Application

Terminalswith screw clamping shall be so designed and constructed that they clamp theconductor(s) without undue damage to the conductor(s). Compliance is apparatusof checking damage .

The terminalis placed in the test apparatus according to tester and fitted with rigid,solid, stranded and/or flexible conductor(s), according to standard first withthe smallest and then with the largest nominal cross-sectional area, theclamping screw(s) or nut(s) being tightened with the torque according tostandard.

The lengthof the test conductor shall be 75 mm longer than the height (H) specified instandard.

The end ofthe conductor is passed through an appropriate bushing in a plate positioned ata height (H) below the equipment, as given in standard. The bushing ispositioned in a horizontal plane such that its centre line describes a circleof 75 mm diameter, concentric with the centre of the clamping unit in thehorizontal plane; the platen is then rotated at a rate of (10 ± 2) r/min.

The distancebetween the mouth of the clamping unit and the upper surface of the bushingshall be within ±15 mm of the height specified in standard. The bushing may belubricated to prevent binding, twisting, or rotation of the insulatedconductor.

A mass asspecified in standard is suspended from the end of the conductor. The durationof the test is approximately 15 min.

During thetest, the conductor shall neither slip out of the clamping unit nor break near theclamping unit, nor shall the conductor be damaged in such a way as to render itunfit for further use.

ConformsTo

IEC60884 Figure11 clause 12.2.5, VDE0620, IEC60947.1 Figure 1

Specifications

A, PowerSupply: 220V 50Hz or 115V 60Hz

B, Testtimes: 1~9999

C, Rate ofTesting: (10±2) r/min

D, Weight: 300g/400g/700g/900g/1400g/2000g*1unit

E, Bushing:37.5mm

F, Diameterof bushing hole (mm): 6.5mm, 9.5mm, 13mm, 14.5mm

G, Height(H)(mm):260mm, 280mm, 300mm, 320mm

H, Dimensions : W*D*H=580mm *350mm* 950mm

I, Weight : 75KG                                                                          

Ordering Information

SFT S2-1302 Test Device for CheckingDamage to Conductors



[Return]

HK Office Phone:(852)5163 6658      Shenzhen Office Phone:(86)755-2303 3320      Email:info@safequipment.com

Copyright © 2024   Safequipment Limited  粤ICP备17137562号  Site map

View My Stats