News & FAQ

FAQ

Home > News & FAQ > FAQ

IEC60884-1 2002-06, Edition 3.0 List Apparatus

Add time:2016-03-09   Clicks:2844   [Return]

TESTING AND MEASURINGEQUIPMENT/ALLOWED SUBCONTRACTING

IEC 60884-1:2002-06, Edition 3.0

Plugs and socket-outlets forhousehold and similar purposes -
Part 1: General requirements

R=Required by Lab       S=May besubcontracted         3PPS=Three Phase Power Supply required

Clause

Measurement/testing

Testing / measuring equipment /   material needed/Safequipment

Subcontracting

8.8

Test of markings

Water, petroleum spirit

R

9

Checking of dimensions

Caliper, micrometer, gauges

Caliper, micrometer, plugs and sockets testing gauge (12units)

R

10

Protection against electrical shock

Jointed test finger, unjointed testfinger, electrical indicator,
 Figures 9 and 10: Gauges for checking non-accessibility of live parts,  through shutters, and of live parts of socket-outlets with increased  protection,

Test plug

Jointed test finger (SFT S1-2010)

Unjointed test finger (SFT S1-2015)

Electrical indicator(SFT S1-2049)

Figures 9: Probes of 20N (SFT S1-2036)

Figures 10: Probes of 1N (SFT S1-2036)

R

11.5

Measuring of contact resistance

AC source, measuring instruments

AC source

R

12.2

Tests on screw terminals

Screw driver and spanner with torque meter, weights,
 Figure 11: Arrangement for checking damage to conductors

Figure 11: Arrangement for checking damage to conductors (SFT S2-1302)

R

12.3

Tests on screwless terminals Weights

Figure 11: Arrangement for checking damage to conductors,
 AC source, measuring instruments,
 Figure 12: Deflection test apparatus

Figure 11: Arrangement for checking damage to conductors (SFT S2-1302)

Figure 12: Deflection test apparatus of screwless terminals

R

13.14

Lateral strain of socket-outlets

Figure 13: Device for checking the resistance to lateral strain

Socket &Plug Pull Strength and Transverse Stress tester (SFT  S2-1305)

R

13.23
 13.24

Test on membranes

Heating cabinet, Freezer

Heating cabinet,   Freezer  

R

14.2

Test of non-solid pins

Figure 14: Device for testing of non-solid pins

Figure 14: Device for testing of non-solid pins 100N (SFT S2-1303)

R

14.23.1

Temperature rise test on plugs of plug-in equipments

AC source, measuring instruments, temperature measuring device

Temperature rise testing on plugs of plug-in equipments

R

14.23.2

Torque test on plugs of plug-in-equipment

Apparatus for the torque test

Apparatus for the torque test on plug (SFT S2-1300)

R

16.1

Ageing test

Heating cabinet, humidity chamber,

Heating cabinet, humidity chamber

R

16.2

Ingress of water

Test devices according to IEC 60529

IPX1-6 tester (SFT S2-10XX)

Figure 15: Test wall in accordance with the requirements of 16.2.1

Test wall

R

16.3

Humidity treatment

Humidity chamber

Humidity chamber

R

17.1

Insulation resistance

Insulation test equipment

Insulation test equipment (TOS7200)

R

17.2

Electric strength

High voltage test equipment

High voltage test equipment

R

19

Temperature rise

AC source, measuring instruments, temperature measuring device, test  block for flush-mounted accessories

Temperature rise testing on plugs of plug-in equipments

R

20
 21

Breaking capacity

Normal operation  

Figure 16: Apparatus for breaking capacity and normal operation,
 AC source, adjustable load (resistors and inductors), measuring instruments,
 Figure 9: Gauge for checking non-accessibility of live parts, through  shutters, after normal operation test,
 Figure 10: Gauge for checking non-accessibility of live parts, through  shutters, and of live parts of socket-outlets with increased protection

Figure 16: Apparatus for breaking capacity and normal operation test  (SFT S2-1321)

Figures 9: Probes of 20N (SFT S1-2036)

Figures 10: Probes of 1N (SFT S1-2036)

R

3PPS

22.1

Verification of the maximum withdrawal force

Figure 18: Apparatus for checking the withdrawal force, test-plug

Socket &Plug Pull Strength and Transverse Stress tester (SFT  S2-1305)

R

22.2

Verification of the minimum withdrawal force

Figure 19: Gauge for the verification of the minimum withdrawal force

Socket &Plug Pull Strength and Transverse Stress tester (SFT  S2-1305)

R

23.2

Test of the cord retention

Figure 20: Apparatus for testing the cord retention,
 Apparatus for the torque test

Apparatus for cord retention testing (SFT S2-1306)

R

23.4

Flexing test

Figure 21: Apparatus for flexing test

Plug and Cord Flexibility Tester (SFT S2-1501)

R

24.1

Impact test

Figures 22, 23, 24, 25 and 26: Impact-test apparatus

Pendulum impact test apparatus (SFT S2-1307)

R

24.2

Tumbling barrel test 

Tumbling barrel according to IEC 60068-2-32

Tumbling barrel test machine (SFT S2-1060)

R

24.3

Test on ordinary surface-type socket-outlets

Cylinder of rigid steel sheet,
 flat steel sheet

Apparatus test on ordinary surface-type socket-outlets

R

24.4

Impact test at low temperature

Figure 27: Apparatus for impact test at low temperature

Apparatus for impact test at low temperature (SFT S2-1308)

R

10.1
 24.5

Impact test at low temperature\

Figure 38: Arrangement for compression test

Apparatus for compression test (SFT S2-1312)

R

24.6

Test on screwed glands

Metal rods,
 test-spanner with torque meter

Torque

R

24.7

Abrasion test

Figure 28: Apparatus for abrasion test on insulating sleeves of plug  pins

Apparatus for abrasion test on insulating sleeves of plug pins

(SFT S2-1309)

R

24.8

Test on shutters

Test-pin, electrical indicator

Apparatus Test-pin test on shutters

R

24.9

Test on multiple portable socket-outlets

Figure 29: Arrangement for mechanical strength test on multiple  portable socket-outlets

Arrangement for mechanical strength test on multiple portable  socket-outlets

R

24.10

Test of the fixing of the pins

插销牢固测试

Figure 30: Example for test arrangement to verify the fixation of pins  in the body of the plug

Apparatus for test arrangement to verify the fixation of pins in the  body of the plug (SFT S2-1311)

R

24.11
 24.12
 24.13

Test on portable socket-outlets with suspension means

Cylindrical steel rod

Apparatuses test on portable socket-outlets with suspension

R

24.14
 up to
 24.18

Removal of covers or cover-plates Weights

Figure 31: Arrangement for test on covers or cover-plates,
 Figure 32: Gauge for the verification of the outline of covers or  coverplates,
 Figure 35: Gauge for verification of grooves, holes and reverse tapers

Gauge for the verification of the outline of covers or coverplates,

(SFT S2-1326)
 Gauge for verification of grooves, holes and reverse tapers

(SFT S2-1327)

R

25

Resistance to heat

Heating cabinet,

Figure 37: Ball pressure test apparatus (SFT S1-2060)

Figure 38: Apparatus for compression test for the verification of  resistance to heat

Apparatus for compression test (SFT S2-1312)

R

26

Screws, current carrying parts and connections

Screw-driver and spanner with torque meter

Screw-driver and spanner with torque meter (9RTD)

R

27

Creepage distances, clearances

Caliper,
 tolerances gauges

Creepage Gauge (SFT S1-2034)

R

28.1.1

Glow-wire test

Test apparatus according to IEC 60695-2-10

Glow-wire tester (SFT F3-3020)

R

28.1.2

Test of the resistance to heat of pins with insulating sleeves

Figure 40: Apparatus for testing resistance to abnormal heat of  insulating sleeves of plug pins

Apparatus for testing resistance to abnormal heat of insulating  sleeves of plug pins (SFT S2-1313)

R

28.2

Resistance to tracking

Test apparatus according to IEC 60112

Tracking tester (SFT F3-3040)

R

29

Resistance to rusting

Chemicals,
humidity cabinet, heating cabinet
 

R

30.1

Pressure test at high temperature

Figure 41: Apparatus for pressure test at high temperature,
 Heating cabinet

Apparatus for pressure test at high temperature (SFT S2-1314)

R

30.2

Static damp heat test

Climatic chamber according to IEC 60068-2-30

R

30.3

Test at low temperature

Freezer

R

30.4

Impact test at low temperature

Figure 42: Impact test apparatus on pins provided with insulating  sleeves

Apparatus for impact test at low temperature (SFT S2-1308)

R

Note: The presence of equipment alone does not indicate a satisfactorysituation. Assessors must evaluate the equipment design, calibration, uncertaintyand documentation to ensure compliance with the directions of the standard. Therequirements of ISO Guide 25 regarding validation are applicable, as the testsof this standard are not standardized tests.




HK Office Phone:(852)5163 6658     Fax:(852)2110 0996     Shenzhen Office Phone:(86)755-2303 3320     Fax:(86)755-2328 7328     Email:info@safequipment.com

Copyright © 2019   Safequipment Limited  粤ICP备17137562号  Site map

View My Stats